My frame wasn't powdercoat but some of the other parts are. I just wanted to make sure it is starting with a good seal. I used epoxy for both the prime and print. It is hard stuff.
It was a 8 hour day to fit, dill, and pull the two HS. In the one photo you can see clamps to help hold it in place you need 6 hands to put the back skins on.
I will cap the rudder and vert fins with glass to round them out some and keep junk from setting in there.
Glass will cover the end gaps on the HS and the big holes on the vert fin.
Glass will come to a point under the engine and around the Batt.