Started building a DR1 helicopter

Diaza01

Newbie
Joined
Aug 5, 2019
Messages
31
Location
GB
Started building a DR1 helicopter with mini 500 transmision and Subaru EJ20 engine
 

Attachments

  • thumbnail_EDB5983D-7AF7-44B9-9641-5DC82B141BA0 (1).jpg
    thumbnail_EDB5983D-7AF7-44B9-9641-5DC82B141BA0 (1).jpg
    180.5 KB · Views: 61
  • thumbnail_AF726FD5-B997-49BB-B721-23FF3155AF30 (1).jpg
    thumbnail_AF726FD5-B997-49BB-B721-23FF3155AF30 (1).jpg
    194.9 KB · Views: 64
  • thumbnail_0F1479BA-99F7-46D1-BD6A-946FFEAC749D.jpg
    thumbnail_0F1479BA-99F7-46D1-BD6A-946FFEAC749D.jpg
    129.8 KB · Views: 60
  • thumbnail_B160D7CA-1E4C-4512-86CA-F851DDDA72EF.jpg
    thumbnail_B160D7CA-1E4C-4512-86CA-F851DDDA72EF.jpg
    189.8 KB · Views: 60
  • thumbnail_D40C5B00-CA4C-443C-A913-9DF41AED5DB4 (1).jpg
    thumbnail_D40C5B00-CA4C-443C-A913-9DF41AED5DB4 (1).jpg
    88.8 KB · Views: 60
  • thumbnail_C78248A0-0625-46A4-AA21-FB0560C35FAD.jpg
    thumbnail_C78248A0-0625-46A4-AA21-FB0560C35FAD.jpg
    103.7 KB · Views: 58
Started building a DR1 helicopter with mini 500 transmision and Subaru EJ20 engine
Install the cooling radiator, Engine Oil Cooler, Transmission oil cooler
 

Attachments

  • thumbnail_2C017E94-77B4-44DD-A741-73F01C70C77E.jpg
    thumbnail_2C017E94-77B4-44DD-A741-73F01C70C77E.jpg
    186.6 KB · Views: 53
  • thumbnail_75E2B672-2DEB-4853-A029-1BBC9930346E (1).jpg
    thumbnail_75E2B672-2DEB-4853-A029-1BBC9930346E (1).jpg
    137.9 KB · Views: 57
  • thumbnail_893197D5-AAE8-4B6A-99C9-D02CFCA6DAEB.jpg
    thumbnail_893197D5-AAE8-4B6A-99C9-D02CFCA6DAEB.jpg
    146.1 KB · Views: 51
  • thumbnail_62A161BA-F328-474D-97C4-CE4934491D0D.jpg
    thumbnail_62A161BA-F328-474D-97C4-CE4934491D0D.jpg
    167.6 KB · Views: 57
  • thumbnail_23FDC30E-E4FD-48CD-A256-9909E9287BDF.jpg
    thumbnail_23FDC30E-E4FD-48CD-A256-9909E9287BDF.jpg
    188.9 KB · Views: 57
With all due respect the welding is full of defects and is not of aircraft quality even for a homebuilt, no DAR worth their salt would pass such construction. I would suggest you consult with someone experienced in aircraft welding or if you are a member of the EAA one of their Technical Counselors before progressing further.
 
With all due respect the welding is full of defects and is not of aircraft quality even for a homebuilt, no DAR worth their salt would pass such construction. I would suggest you consult with someone experienced in aircraft welding or if you are a member of the EAA one of their Technical Counselors before progressing further.
Thanks your advice appreciate your massage
 
Top