RAF rotorhead-$599

Kevin_Richey

Moderator
Staff member
Joined
Nov 16, 2003
Messages
3,197
Location
AZ @ 4,500'
Send me your email address & phone # in a PM here on the forum if you're interested in acquiring this from the seller.
This is not my rotorhead, but am listing it for a friend who is not a forum member. I'll receive no compensation from him for posting this here.

-Kevin Richey

This 370 hour rotor head has a 53 hour SKF 3206 A-2RS1 rotor bearing, as well as several new bolts/nuts which I replaced during its last annual:

AN8-36 spindle bolt, AN310-8 castle nut (50 ft. lbs.),
top alum. washer replaced for 4130 steel (highly recommended)

AN6-44 pivot bolt/nut

AN6-31 gimbal mount stand bolt/nut

AN5-17A bearing block bolts/nuts

AN4-22A gimbal activation arm bolts/nuts

The Bendix prerotator drive always worked well for me.
The ring gear is in very good condition.
The gimbal activation arm is the older style.

Sold “As Is, Where Is” and without warranty or airworthiness claim.
$599 + UPS to USA addresses only.
 

Attachments

  • [RotaryForum.com] - RAF rotorhead-$599
    370 hour RAF roto head.webp
    24.8 KB · Views: 41
Back
Top