NEW propellers for sale

scottessex

Sling-Wing Pilot
Joined
Nov 12, 2003
Messages
11,102
Location
central, ga
Aircraft
Dominator 582
Total Flight Time
200+
For all you builders out there...

I have 2 GSC 64" x 32 propellers, they are made for a rotax 503 with 2.58 gearbox in a pusher config.
These are the same ones sportcopter uses on their 503 machines.
They will not work on my project. One is Brand new, the other used very little and sent back to factory to be refinished. Both props are LIKE NEW.

One is more scimitar shaped, the other has squared off ends, but they are both 64x32.
Both props are very well made and lightweight.

I am offering them here first before I place them on barnstormers.
Please send me a PM if interested.

I am asking $300 each, I can split the shipping with you.

These retail for around $350 plus shipping from Canada.
 

Attachments

Jazzenjohn

Gold Supporter
Joined
Oct 9, 2004
Messages
2,731
Location
Milan Mich.
Aircraft
Gyrobee, My design
Total Flight Time
350
I've often wondered if a wood prop like that is lighter than the Powerfin I currently use. Can you get an accurate weight for your props Scott?
 

rcflier

Junior Member
Joined
May 24, 2007
Messages
327
Location
Nexø (Denmark)
Aircraft
Auto-Gyro MTO Sport 914
Total Flight Time
6
Scott, may I hijack your thread a little?

Just too bad something as long as a prop is outrageously expensive to send to Europe.

I tried to buy a new wooden prop from someone here, but I fell off my chair when I got a freight quote.

Has anyone got a way of getting it to Europe (Denmark) at a reasonable cost?

I have a WW1 type prop of 62 x 32, but it was made for a 447.

Cheers
Erik
 

scottessex

Sling-Wing Pilot
Joined
Nov 12, 2003
Messages
11,102
Location
central, ga
Aircraft
Dominator 582
Total Flight Time
200+
John, the props appear to weigh about 5 lbs each.

Erik, I can check with one of my sources for shipping. ;)
 

BEN S

Active Member
Joined
Nov 15, 2007
Messages
2,281
Location
YUMA,AZ
Aircraft
Sportcopter Vortex "light"
Total Flight Time
200+
These are fantastic props!
And a good deal too!
Also, the Epoxy Resin bonded leading edges are incredible (and an expensive option)
I had shattered a prop just like these and a year later in the desert found one of the resin edges, it was still pliable!
If you have a 503, this is a beautiful prop.
 

Jpipe

Newbie
Joined
Aug 24, 2011
Messages
109
Location
Jesup,GA
Aircraft
Vancraft Lightning
Total Flight Time
1000
Propeller for sale

Propeller for sale

Ok. You have got my attention for one.
I need to do some checking to see if it will fit.
 

Kevin_Richey

Yamaha gyro...Oregon, USA
Joined
Nov 16, 2003
Messages
2,139
Location
Oregon, USA
Aircraft
Sport Copter gyroplane
Total Flight Time
300+ gyroplane, 11 airplane, 1.5 PPC, AND... a ZILLION hours of flying in my dreams!
For all you builders out there...

I have 2 GSC 64" x 32 propellers, they are made for a rotax 503 with 2.58 gearbox in a pusher config.
These are the same ones sportcopter uses on their 503 machines.
They will not work on my project. One is Brand new, the other used very little and sent back to factory to be refinished. Both props are LIKE NEW.

One is more scimitar shaped, the other has squared off ends, but they are both 64x32.
Both props are very well made and lightweight.

I am offering them here first before I place them on barnstormers.
Please send me a PM if interested.

I am asking $300 each, I can split the shipping with you.

These retail for around $350 plus shipping from Canada.
Scott: A guy in our local PRA chapter is looking for a prop along the size of these you have (had?)
Still have either one?
 
Top