MGL Extreme EMS

[Mike Leimetter]

Anyone using the MGL Extreme EMS/EFIS? I have questions

Mike

 

[sparxfly]

I am the NZ MGL dealer- I should be able to assist with advice.
What's the problem?

 

[Mike Leimetter]

I am the NZ MGL dealer- I should be able to assist with advice.
What's the problem?

Thank you for chiming in sir. I got some possible answers on the MGL users forum. Basically I’m having trouble setting up some of the things on my EMS. The fuel level sensor sometimes reads (not real accurately) and sometimes says 0.0 or “fail”. I think I finally have the Amp sensor figured out. In the location I have it it’s reading power being used I.e. -1.5 etc. My engine RPM (wire off the ECU) bounces up and down and never gives a steady reading (although my static rpm gauge off the same wire works fine). And I’m not sure my fuel flow sensors are reading accurately but I’m not sure how to further calibrate them. I have a Subaru engine, and using RDAC XF. My coolant sensor (MGL bought at Aircraft Spruce) just reads -27 no matter what temperature the engine is. I haven’t even gotten around to trying the rotor rpm yet. Sorry for all the newbie questions, I’m not very electronically inclined. I realize this is a lot to throw at you. Seems like a lot of ADC setting i don’t understand. I’m going to trace all the ground wires next weekend to make sure they are all solid.
Mike

 

[sparxfly]

OK, a lot of things, but should be fixable one step at a time.
Probably best we take this offline- email me at [email protected].