Hungarian gyrocopter

[SC-200]

I know that USA is far from Hungary, but maybe someone interested in what we're doing

www.autogyroclub.com/skycruiser

YouTube - ‪Homebuild SkyCruiser Gyrocopter...www.autogyroclub.com‬‏
YouTube - ‪Gyrocopter flying...cockpit wiev ( head cam)‬‏

http://www.facebook.com/media/set/?set=a.121266174621402.29242.100002140604294&l=b251030e38


Good landing!

Joe

 

[Boots]

Nice gyro......Thanks for posting the video.

 

[Gyro_Kai]

Very nice gyro, looking vaguely familiar .

Can you tell us a little more, like how it was built, engine etc.

Kai.

 

[Passin' Thru]

Very nice machine!
Great photos also.

 

[choppergabor]

Pete he is my good friend Joe Mészáros and he built the sc himself. We talk a lot since gyros are becoming very popular in Europe and Hungary is a cheap and also lightly regulated airspace to fly in

 

[Passin' Thru]

I saw the build photos. Very impressive!

 

[Dmorris]

Nice! Hungary is a beautiful country. I've driven across it twice and stayed in Budapest a couple of times.

 

[Arnie Madsen]

I know that USA is far from Hungary, but maybe someone interested in what we're doing
Joe

Welcome Joe .... did you know there is a Hungarian building a gyro in Florida ?? (ChopperGabor)

Thanks for the videos from your country. If you come across a Corvette Yellow RAF-2000 ser #H2-90-1-7 in Hungary , I painted it in Manitoba Canada around 1992. It arrived in your country still under Canadian registry C-FKEE.

That is all I know , and it is not very much. thanks again for the videos.

Arnie

 

[SC-200]

Szia Gabesz. Köszi az ismertetésemet.

Hi all!

Thank you the nice words.

Kai:here my blog how my gyro built: www.autogyroclub.com/joeblog2 (but hungary language pls use the google translator or ask ChopperGabor to help you)

David: if you come hungary again, call me before, then you can to try my gyro ))))

Arnie: It's very intresting. Maybe this is the only one RAF-2000 wich is working (but not flying) in hungary. It bought my friend, then I have to repair and check it.
I know another three pieces, but they are terrible status.

I have new project. I'd like to build gyrocopter with subaru engine (EJ22).
This video from engine start, and balance.... (www.skycruiser.hu/subaru)

Thanks again to praise, and sorry my english....

Have nice day!

Joe

 

[SC-200]

ARNIE: my friend told me the registration: C-FKEE.... )))
At the moment is yellow color.

Joe

 

[choppergabor]

Szia Joe! Nagyon szivesen segítek ha esetleg kell fordítani de ahogy látom nem sok gond lesz az Angollal Mellesleg nagyon jó csapat van itt. Ez a legjobb website a világon minden informácíóért. Kimeríthetelen tudás forrás amit itt kaphatsz. Mellesleg itt a saját csatornám amin a Behemót építése folyik. http://www.rotaryforum.com/forum/showthread.php?t=25249 Jó hogy feliratkoztál. Szuper kis oldal ez
Gabi

 

[SC-200]

Szia Joe! Nagyon szivesen segítek ha esetleg kell fordítani de ahogy látom nem sok gond lesz az Angollal Mellesleg nagyon jó csapat van itt. Ez a legjobb website a világon minden informácíóért. Kimeríthetelen tudás forrás amit itt kaphatsz. Mellesleg itt a saját csatornám amin a Behemót építése folyik. http://www.rotaryforum.com/forum/showthread.php?t=25249 Jó hogy feliratkoztál. Szuper kis oldal ez
Gabi

Szia.

Már jól megnéztem, csak akkor még nem volt regisztrációm és nem tudtam beleírni.

 

[Gyro_Kai]

Hello Joe,

the rotor head and many other components are not copies, they are original parts from autogyro-europe, right?
I see the differences though. Great work!

Kai.

 

[SC-200]

Hello Joe,

the rotor head and many other components are not copies, they are original parts from autogyro-europe, right?
I see the differences though. Great work!

Kai.

Hi.

No original. Just a little copy, (similar, but different) I designed and drew it. I was thinking a lot of time the starter of prerotator, then I use coil and bendix.
We made all components...(wheels too....it made my friend)

[IMG]http://skycruiser.hu/draws/6.jpg[/IMG]
[IMG]http://skycruiser.hu/draws/26.jpg[/IMG]
[IMG]http://skycruiser.hu/draws/5.jpg[/IMG]g

 

[ckurz7000]

Hi Joe, I think I saw your gyro in Fertöszentmiklós. It looks like a reliable and well thought out piece of work. I'd love to try it one day, if I get the opportunity.

Good luck with your Subary project, -- Chris.

 

[SC-200]

Hi Joe, I think I saw your gyro in Fertöszentmiklós. It looks like a reliable and well thought out piece of work. I'd love to try it one day, if I get the opportunity.

Good luck with your Subary project, -- Chris.

Ok, maybe on next week.

 

[Passin' Thru]

Hi.

No original. Just a little copy, (similar, but different) I designed and drew it. I was thinking a lot of time the starter of prerotator, then I use coil and bendix.
We made all components...(wheels too....it made my friend)
QUOTE]

Joe, which CAD program you use for 3-D modeling?
TIA