Help

krew

Keepin it Real...
Joined
Nov 27, 2005
Messages
324
Location
Arizona
Hello can anyone post a picture of a cluster plate for the gyrobee? The plans say that the 1/4 inch hole is 1/10th away from the side of the cluster plate! That would mean the hole would fall off the side! heres the picture of the plans, sorry if its blurry i took it with my phone.

[RotaryForum.com] - Help

[RotaryForum.com] - Help

[RotaryForum.com] - Help


I need help, If you look, it sais the plate is 7 inches long and 2 inches wide and 1/8th of an inch thick. the hole 1/4 inch is 6.50 away from the side and 1 inch into the plate 1/2 way. Are the drawings and measurements wrong or am I doing something wrong.
 
Hey, glad we all could help. :D
 
Back
Top