cleaning house

Joined
May 11, 2005
Messages
149
Location
Burlington Wi
Hi All getting rid of some of my old helicopter stuff that I am not going to use anymore

1 mini 500 rotor head
2 scorpion 2 rotor head that was converted to what appears to be a exec style no cable.
3 scorpion 2 rotor shafts one steel and the other what appears to either be aluminum or titanium
4 scorpion 2 swash plate that appears to be converted to full cyclic/collective
5 main rotor transmission. a converted chevrolet S10 front differential with 4,10 gear ratio. 1.5 rotor shaft dia
6 A/W 95 drive and idler pulleys.
7 3 piece construction main rotor blades that were built to fit a mini 500 rotor head
NACA 0012 airfoil,blades were started but never finished everything has been fitted and pre drilled but never assembled.
9 A/W 95 tail rotor control pedals.
10 1991 arctic cat 440 engine with carbs and electronics.
11 A/W 95 rotor hub plate has some minor scratches.
12 rotor blade leading edge extrusions 10 and 12 ft NACA0012 8'' chord
and 10ft 7''NACA0012 extrusions only build your blades from here
13 4 fleck extruded aluminum rotor blades 8''x 12 NACA0012 blades only missing the leading edge balance weights
let me know what you wand and I'll get you a price going cheap!!!

Doug
 
Last edited:

bryancobb

Junior Member
Joined
Aug 2, 2010
Messages
5,029
Location
Cartersville, GA
Aircraft
Owned Brantly B-2b/Fly Kitfox III/Mini-500b
Total Flight Time
1350
Hello Doug

Hello Doug

Hi All getting rid of some of my old helicopter stuff that I am not going to use anymore

1 mini 500 rotor head
2 scorpion 2 rotor head that was converted to what appears to be a exec style no cable.
3 scorpion 2 rotor shafts one steel and the other what appears to either be aluminum or titanium
4 scorpion 2 swash plate that appears to be converted to full cyclic/collective
5 main rotor transmission. a converted chevrolet S10 front differential with 4,10 gear ratio. 1.5 rotor shaft dia
6 A/W 95 drive and idler pulleys.
7 3 piece construction main rotor blades that were built to fit a mini 500 rotor head
NACA 0012 airfoil,blades were started but never finished everything has been fitted and pre drilled but never assembled.
9 A/W 95 tail rotor control pedals.
10 1991 arctic cat 440 engine with carbs and electronics.
11 A/W 95 rotor hub plate has some minor scratches.
12 rotor blade leading edge extrusions 10 and 12 ft NACA0012 8'' chord
and 10ft 7''NACA0012 extrusions only build your blades from here
13 4 fleck extruded aluminum rotor blades 8''x 12 NACA0012 blades only missing the leading edge balance weights
let me know what you wand and I'll get you a price going cheap!!!

Doug
Hi Doug,

I would like some specific info on the blades, if you have any, please.

b r y a n AT l l i n d DOT c o m

I'm really interested:
* Whose are what company's design are they
* Who fabricated them
* Specific grades and density of materials used
* What adhesive was used to bond the skin to the foam
* Span and How much twist do they have
* Weight
* Rivets?
* Your Price

Also your price for the M-500 head?

Any pictures you'd kindly be willing to send me.

Thanks,
Bryan Cobb
 
Top