GitItOn
Member
- Joined
- Nov 1, 2004
- Messages
- 15
- Location
- Medford
- Aircraft
- Air Command Gyro / Cessna 172
- Total Flight Time
- 200
I was told to screw a hole in the tip of the rotor and thread a small screw in to balance (adding washers if/as needed). My blades are near perfectly balanced, but I thought I'd check. vibration is minimal, but there....
Bensen 10' Blades with a 4' hub bar
https://www.physicalflight.com/pictures/mygyro/pictures/dscn3360.html
Bensen 10' Blades with a 4' hub bar
https://www.physicalflight.com/pictures/mygyro/pictures/dscn3360.html