Amount of travel of Hub bar

[j4flyer]

Question, with the rotorhead full forward and locked into that position, the hub bar installed between the towers and in a level position, how many degrees does the hub bar travel from stop to stop ? Is there a preferred amount of hub bar travel before it contacts the flap stop ?

 

[anthom]

I read somewhere that it was 18 degrees. Thread below has some details.

Help With Tail Clearance

The Saga continues....... I have the heintz 57 gyro mocked up, here is what I have in the pictures you can see the tail to rotorblade clearance. How much is enough? I know that the blades will be flexed upwards in flight. The pics were taken with the blades all the way back against the stops...

www.rotaryforum.com

 

[j4flyer]

I read somewhere that it was 18 degrees. Thread below has some details.

Help With Tail Clearance

The Saga continues....... I have the heintz 57 gyro mocked up, here is what I have in the pictures you can see the tail to rotorblade clearance. How much is enough? I know that the blades will be flexed upwards in flight. The pics were taken with the blades all the way back against the stops...

www.rotaryforum.com

Thank you for the link. That was exactly what I was searching for. Bob