Butch
Active Member
I have a set of 24 foot aluminum extruded blades for sale. They have a 3 foot hub bar and an 8 inch chord. They are in very good condition. They are too long for my bensen. $ 800.00 I will ship
Last edited:
24 foot aluminum extruded blades
- Thread starter Butch
- Start date
Capt'n Gator
Junior Member
- Joined
- Sep 25, 2012
- Messages
- 675
- Location
- Goldsboro, NC
- Aircraft
- Gyro Technic VX-2 N663WM, Dominator Single 582BH N401JC
- Total Flight Time
- 250+
Who is the manufacturer? Pics please
AviomaniaTexas
Tom Duncan
- Joined
- Apr 7, 2010
- Messages
- 651
- Location
- Edgewood, Texas
- Aircraft
- Aviomania G2sB Genesis Duo
- Total Flight Time
- 170 Ultralight FW, 500 Gyro, 15 GA
I would like to know too.
Butch
Active Member
![[RotaryForum.com] - 24 foot aluminum extruded blades](https://data3.rotaryforum.com/attachments/132/132673-b326ea09037ef9c7d170ab3e049eba7f.jpg?hash=iBNasuFlUy "[RotaryForum.com] - 24 foot aluminum extruded blades")
![[RotaryForum.com] - 24 foot aluminum extruded blades](https://data3.rotaryforum.com/attachments/132/132672-bc129ca945bfe93aed6fb1ab03aa7dee.jpg?hash=3Bp313hkTn "[RotaryForum.com] - 24 foot aluminum extruded blades")
Butch
Active Member
![[RotaryForum.com] - 24 foot aluminum extruded blades](https://data3.rotaryforum.com/attachments/132/132675-bc129ca945bfe93aed6fb1ab03aa7dee.jpg?hash=3Bp313hkTn "[RotaryForum.com] - 24 foot aluminum extruded blades")
![[RotaryForum.com] - 24 foot aluminum extruded blades](https://data3.rotaryforum.com/attachments/132/132676-b326ea09037ef9c7d170ab3e049eba7f.jpg?hash=iBNasuFlUy "[RotaryForum.com] - 24 foot aluminum extruded blades")
Capt'n Gator
Junior Member
- Joined
- Sep 25, 2012
- Messages
- 675
- Location
- Goldsboro, NC
- Aircraft
- Gyro Technic VX-2 N663WM, Dominator Single 582BH N401JC
- Total Flight Time
- 250+
They look like Rotor hawk blades by Neal Carnes perhaps
Butch
Active Member
They are for sale. I can not use them on my bensen due to the height of the mast they hit the ground with the stick all the way back. I thought of raising the mast but I do not know what that would due to stability. Also they are heavier than the original blades and I am not sure if the stock rotor head would handle it. I have been trying for so long now to find a set of blades that are the right length and hand startable. I have a pre rotater but it was on a rotax and it will not work on the benson. I am trying to find someone who has a set to trade for the 24s I have or I will sell the ones I have for $ 800.00I paid $ 2,400.00 for them just last year. I hope that I can find something before the Ken Brock fly in. I also have many other benson parts if someone is looking.
Last edited:
Butch
Active Member
Someone here messaged me about these rotor blades. I can not find the message. If anyone is interested I will bring them to the Ken Brock fly in at El Mirage
Brian Jackson
Platinum Member
- Joined
- Jul 17, 2004
- Messages
- 3,545
- Location
- Hamburg, New Jersey USA
- Aircraft
- GyroBee Variant - Under Construction
Is Denis (of Gyrotechnic) going to be at the event? I understand he has been very helpful in pairing others' gyros with optimal blades at other events. Just a thought.
Butch
Active Member
At the time I was without blades for my Bensen. I would be taking a big loss at $ 800.00. A good friend gave me a set for my Bensen so I had decided to try and get a better price for them. As I said I paid $ 2,400.00 for them and they are in very good condition. I have thought it over and I will keep my word at $ 800.00 but I will need to build a box for them to be shipped. The total price would be $ 1,100.00 and you would have to take care of shipping. This is still a very good price and these blades would be a good choice for your application
