Search results

  1. bugflyer

    New build, Aviomania G1sB Genesis

    Smile...I meant you could install a roller.
  2. bugflyer

    New build, Aviomania G1sB Genesis

    Roller on trailer edge? Boat trailer V-roller?
  3. bugflyer

    Seeking Source for 3/32" Rudder Cable Housing/Conduit/Sheath

    Wicks. Any Bowden cable supplier.
  4. bugflyer

    Tow Bar Head

    Put longer axle bolt in nosewheel. Brackets on mover hook the extended bolt on both sides of nosewheel and lift nosewheel. Play with dimensions of mover wheels, bracket heights, tongue length to get acceptable downforce required at ball hitch.
  5. bugflyer

    FlyCom Helmet

    I used my HALO several times in R22 with doors off and it was great. At home I trial-fit a Pyrotect full-face helmet over the HALO and it was comfortable. This is the setup I plan to use when the NANO gyro arrives, smiles, Charles
  6. bugflyer

    AirGyro AG915 N4446S now has its airworthiness certificate, too.

    Mistakenly I thought you used it on the mating surfaces of spade type connectors. Should not get on mating surfaces of multi-pin connectors but can help with sealing connectors. smiles, Charles
  7. bugflyer

    AirGyro AG915 N4446S now has its airworthiness certificate, too.

    I think you mean electric conductive grease. Dielectric grease insulates connectors. smiles, Charles
  8. bugflyer

    modern single place gyros?

    Perhaps you haven't seen this? https://www.fusioncopter.eu/en The Minari 50HP engine has been replaced with a Hirth 50HP F23. smiles, Charles
  9. bugflyer

    Portable blade hoist for pickup trucks?

    Use the stake pocket opposite the vertical to wire-brace the bending load. Just keep the load approximately in line with the wire brace. And use the pockets closest to the cab for extra 90 degree support from the bed front. smiles, Charles
  10. bugflyer

    Rotor hoist

    Use the stake pocket opposite the vertical to wire-brace the bending load. Just keep the load approximately in line with the wire brace. And use the pockets closest to the cab for extra 90 degree support from the bed front. smiles, Charles
  11. bugflyer

    AirGyro AG915 N4446S now has its airworthiness certificate, too.

    Here's the one (or two) in New Zealand. https://www.rotaryforum.com/threads/tail-boom-issues.1146239/ smiles, Charles
  12. bugflyer

    AirGyro AG915 N4446S now has its airworthiness certificate, too.

    Only thing I remember is cracked tail boom on Xenon in Australia or New Zealand. In Xenon kit forum. smiles, Charles
  13. bugflyer

    Person knowledgeable on Rotax 503

    RS is for rubber seal and would be the same for both bearings. Measure your width and it will be 22.2mm. smiles, Charles
  14. bugflyer

    Person knowledgeable on Rotax 503

    5304=22.2mm wide 6304=15mm wide smiles, Charles
  15. bugflyer

    Flying Car Progress

    That's not Terrafugia smiles, Charles
  16. bugflyer

    Gyro Trailer For Sale—$2500

    Albuquerque is only 15 hours from each of you. :unsure:
  17. bugflyer

    SOLD......1971 McColloch J2 #58 out of 83 made

    I used escrow.com to purchase an R-22 governor from England. Worked perfectly. smiles, Charles
  18. bugflyer

    Fusioncopter Nano Ultralight Gyroplane USA Distributor

    Google says "I 'd love to see the weigh-in! very surprising only 107 kg"
  19. bugflyer

    914 oil/turbo issue.

    Don't have an answer...just wanted to say it's good to see you back on the forum. smiles, Charles
Top