Search results

  1. L

    Bensen B-8 rotor "grips?"

    I have original Bentsen hub bar And original Bentsen blades if you want to copy
  2. L

    Upgrade to Xenforo

    Will be happy to contribute
  3. L

    Landing in Dangerous Places for Twenty Years (Vance will slap my wrist)

    We had to land in a very tight area for years as the farmer who owned the fields behind us was totally against helicopters. We once landed in his field, and he ran over and beat the hell out of the helicopter with a stick... (!) https://youtu.be/TNrwBs44U4s
  4. L

    bensen blades wanted

    Bensen blades Bensen blades The blades are new still in the original box. Give me a ring on 01254 822723 I am in Clitheroe Lancs Luciano.
  5. L

    bensen blades wanted

    Bensen blades Bensen blades I have new set of blades and hub bar. I am in the uk. Luciano.
  6. L

    Forum Support and Fund Raising

    I spend my money wisely!!! by donating $ 20 to the rotary wing forum. Luciano.
  7. L

    Mini-500 Final Setup Runup Rigging and Track & Balance

    Brian. That coupling is now driving an r22 trg on my yamaha project ,sorry L.
  8. L

    Mini-500 Final Setup Runup Rigging and Track & Balance

    Question for Dennis. I have fitted a retracting seat belt fixed in a y pattern to the shoulder straps of my mini. Do you think one retracting unit is sufficient or would you like to see two of them. Your opinion please. Thanks. Regards. Luciano.
  9. L

    Mini-500 Final Setup Runup Rigging and Track & Balance

    Mini 500 Mini 500 Bryan . Let me add my congrats to the completion of a great little machine ! WELL DONE. Regards. Luciano.
  10. L

    Mini-500 Final Setup Runup Rigging and Track & Balance

    BRYAN . Thanks for your offer, I need six washers and (blue chips)has found me some on ebay,thanks Ken. Francois all uk suppliers have washers with the tabs 5 mm. wide,the washers from the usa have tabs measuring 4.1mm same as the slots on the gland nut.The locking washer used by Dennis must...
  11. L

    Mini-500 Final Setup Runup Rigging and Track & Balance

    Can anybody help me! I am unable to purchase wo7 tab washers for the rotor spindles. I purchased six wo7 washers here in the uk but unfortunately the tabs are too wide because they are in metric.The inner tab is also very short and unsuitable. I will pay paypal in advance if anybody could send...
  12. L

    Mini-500 Final Setup Runup Rigging and Track & Balance

    Barney Barney Thanks for your thoughts - much appreciated. I also need a bit of luck! Keep well. Luciano. P.S. Give my regards to your dad.
  13. L

    Mini-500 Final Setup Runup Rigging and Track & Balance

    Things Things Hi Bryan. Struggling after big op, need more chemo, I am going to see the surgeon on Thursday. Hopefully things will improve soon . Thanks for asking. I am following the testing of your creation with great interest! Keep well. Luciano.
  14. L

    Mini-500 Final Setup Runup Rigging and Track & Balance

    Bravo.Bravo.Bravo Congratulazioni,,,, Luciano.
  15. L

    Finalizing Mini-500 Drivetrain

    Lurking around. Lurking around. Hi Barney . Hi Bryan. Thanks for remembering me, Flying passion dies hard with me, hence the lurking around . Barney please give my best regards to Barney senior . Bryan, I am watching every move you make!!!! Regards L.
  16. L

    Brantly b2b

    Running mini for the first time Running mini for the first time I am waiting also, All the very best. L.
  17. L

    Technical Questions for Dennis Fetters

    Thanks Rick. I do not know where the 114 lb came from but it is down in my note book. L.
  18. L

    Technical Questions for Dennis Fetters

    Torque setting for spindles gland nut. Torque setting for spindles gland nut. I have two torque setting written in my record book. One is 70 f lb. Other is 114 f lb Which is correct. Thanks Luciano.
  19. L

    Mini-500 Support Thread

    Thanks Barney, thanks Bryan. We are all being very positive here and hope for the best. Luciano.
Top