Search results

  1. G

    Mini 500's FOR SALE...

    says being relisted due to a non paying bidder....If you click the original link it says 0 bids. I'm confused.
  2. G

    looking for a good used handheld radio and headset

    looking for a good used aviation handheld radio and headset. let me know what you got. send price and pics to [email protected]
  3. G

    Mini 500's FOR SALE...

    WOW! anyone need parts? http://www.ebay.com/itm/7-Revolution-Mini-500-Helicopters-with-extra-parts-and-50-Main-rotor-blades-/182431637592?forcerrptr=true&hash=item2a79c5e058:g:nNoAAOSwo4pYhiw5&item=182431637592
  4. G

    912 uls 100hp

    I just saw a TITAN TORNADO II W/Rotax 912 ULS 475hrTT sale on Barnstormers for $15K that was an entire airplane....
  5. G

    Faa new build forms

    Thanks Guys, I'll call EAA tomorrow.
  6. G

    Faa new build forms

    Does, any one know where to obtain the forms and data plate for a new build? I heard there is a new builder processing kit??
  7. G

    Happy Birthday Paul P!

    Thanks ya'll....I have not been on the forums for awhile been working a lot of hours and I bought a Titan Tornado II (unfinished kit) that is consuming my spare time.
  8. G

    Rotor blades

    Norm, Perhaps I should better explain what I meant as you seem to have taken offense to what I said. Airfoils and blade cord play a major roll in lift when it comes to rotor blades. DW have an airfoil that produces a lot of lift but with lift comes drag. (hence the comment) I spoke with Ernie...
  9. G

    Rotor blades

    Matt, I disagree with Norm...not to say he is wrong but I feel the dragon wing rotors are very draggy and have a lower inertia than most blades on the market. I am currently using dragon wings and due to the high lift high drag make for a good slow flight but seem to take more power to fly. I...
  10. G

    Mini-500 Final Setup Runup Rigging and Track & Balance

    He did say it would straighten out if idle down for a few minutes and it would start up later when flying....u may be right (that would give the bowels a chance to fill up)
  11. G

    Mini-500 Final Setup Runup Rigging and Track & Balance

    If starving for fuel was an issue then why the change with the rubber grommets and before it did not start till after 12min of runtime??
  12. G

    Mini-500 Final Setup Runup Rigging and Track & Balance

    Well, after watching the video and seeing that tensioner bounce I would have to say its to loose or the belt is climbing on a guide and jumping teeth. The engine may be pulling up and changing the angle of the pulley causing it to ride to one side and climbing on the belt guides you added.
  13. G

    Air Command Gyro forsale & other cool stuff!!

    Items are up on eBay now...gyro and alumicycle are a little lower for starting bid..
  14. G

    Air Command Gyro forsale & other cool stuff!!

    refresh :~) Slow MO https://www.youtube.com/watch?v=vVjklvbEIuY
  15. G

    Mini-500 Final Setup Runup Rigging and Track & Balance

    Do you have any pics of the engine compartment, detailed pics of engine mounted,beltdrive,compression rods...etc.
  16. G

    Air Command Gyro forsale & other cool stuff!!

    Looking to buy a new toy so these items are up for sale... Nice Flying Air Command!! Rotax 503 B-box W/wunderlich prerotator DCSI little over 200hrs 23' Dragon wings (purchased last fall BRAND NEW FROM ERNIE) Upgraded redundant mast, new rotor bearing, large horizontals W/2 degrees neg pitch...
  17. G

    Skywheel hub bar

    I have a white one in excellent condition W/teeterblock...$200 + shipping
  18. G

    Engine Off, No-Roll Auto

    Nice one Chris! what was your headwind speed?
  19. G

    TJ100 Turbojet on a hoverboard?

    From what I read on the engines he is using which are use in the RC jets they produce about 45 to 55lbs of thrust and with four he is able to achieve the lift he need to overcome his body weight and fuel he is carrying. He looks to be about 160lbs.....so this is not out of the question but the...
Top