Search results

  1. M

    LittleWing LW-3 For Sale

    Bump.....LittleWing still for sale....look a couple of posts back for a link to a video of it flying. $13,999 or offer. Call or text 337-523-1929
  2. M

    LittleWing LW-3 For Sale

    Price reduced to $14,999 Video link below from a few days ago....it is not edited....a couple of low passes and several landings. https://youtu.be/o9cExJRA3ac
  3. M

    Only 2 Flying Little wing videos on the net ?

    I know this thread is a few years old...here is video of my flying LW-3....this is the one mentioned earlier built by Fred Perdue. I have owned it a couple of years or so along with two other gyroplanes. It is currently advertised for sale on this forum and on Barnstormers. The video is not...
  4. M

    LittleWing LW-3 For Sale

    Bump...... I still have the LittleWing, I fly it every couple of weeks or so along with my other two gyroplanes. it has 65 or so hours....no issues. $15,999 or best offer
  5. M

    LittleWing LW-3 For Sale

    Kelly, I just saw your post yesterday.....haven't checked the forum in a couple of weeks or so......I tried to call the number...left you a message.
  6. M

    LittleWing LW-3 For Sale

    Yes, I still have it.....have not advertised it is several months......was waiting for warm weather. I flew it a few days ago....we have had record high temps in south Louisiana for the last couple of weeks. What is your weight and height?? Builder was not a large person so it's tight if you...
  7. M

    LittleWing LW-3 For Sale

    Had it almost sold a couple of times but the deals fell through.............Price reduced to $15,999 I have three gyros and hangar is crowded......make an offer??
  8. M

    LittleWing LW-3 For Sale

    Price reduced to $19,999....need to sell....bought MTO Sport
  9. M

    LittleWing LW-3 For Sale

    more photos
  10. M

    LittleWing LW-3 For Sale

    LittleWing built in 2007, N503AG, all logs, airworthiness certificate Rotax 582, 25 ft. DragonWings 60 hours on airframe, approx 150 hours on engine, electric start, runs well $19,999 I have owned it a little over a year and have flown it 25 or so hours......there are no issues. I am...
  11. M

    Requirements for Helicycle Purchase from Existing Owner?

    Heliboy, For clarification......there is no "time-out" or "mandatory replacement" for any component on any experimental aircraft.....helicopter or fixed wing. All components are inspected and replaced "on condition." I was told or read somewhere that B. J. Schramm designed the components on...
  12. M

    25 ft. McCutchen Skywheels For Sale-$2700

    I found out a little more history on these blades.....they were purchased new by a man in the Midwest (I think Iowa) for a gyro that was never completed. They were stored in the box for many years until he sold them to Ed Burks in the Monroe, LA. area. Ed only flew them a few times and I...
  13. M

    25 ft. McCutchen Skywheels For Sale-$2700

    I have a very very good condition like new set of 25 ft. Skywheel blades. These are not the "new" blades being built now but the older design but they look almost new. Total time is not known but obviously they are not high time blades. Price is $2700 they are located in South Louisiana.
  14. M

    Little Wing builders/pilots in TX

    The two big ones was putting a larger prop....58" PowerFin to a 64" WarpDrive and going from 23' Phoenix rotors to 25' DragonWings. When I first got it and flew it....coolant temps and EGT's were too high. Finally figured out the coolant sensor was bad and the old prop was pitched too flat for...
  15. M

    Helicycle 3722T For Sale

    Helicycle is still for sale.....Lots of calls, emails and texts but no one has actually come to look at it. Turbine has approx 800 hours because David told me the original engine had a leaking seal so it was changed when the total time was around 400 hrs. Same thing on the main...
  16. M

    Would like to watch a Helicycle in flight

    Aaron, I live in Kaplan, LA. about 20 miles SW of Lafayette. I fly mine every couple of weeks or so. Closest paved airport is KIYA...about 8 miles east of my private strip. And mine is for sale on Barnstormers and on this forum. And if you haven't seen my YouTube video...search for "Max...
  17. M

    Little Wing builders/pilots in TX

    David, I live in south Louisiana...just south of Lafayette and it appears I am probably the closest person to you with a LittleWing. I did not build mine...I bought it last year from Fred Perdue in Virginia. I have done a few things to it and it now flies 50% better. If you have any questions...
  18. M

    Good shot of my littlewing

    Jonathon, I have had my LittleWing for almost a year so I can answer your questions. According to Ron Herron, all LittleWings need a stick lock. The stick is extremely "heavy" when taxiing around with rotors not moving. The stick stays in the locked forward position until pre rotation is in...
  19. M

    23 ft x 8" chord Phoenix Rotor Blades/Like New--$2500

    I have a like new, less than 30 hours, set of 23 ft. Phoenix rotor blades for sale. These are built in North Carolina and are white painted aluminum. (they look a lot like Sport Rotors). New these blades are close to $4000 I was told. These blades were on my LittleWing i purchased last year...
  20. M

    Helicycle 3722T For Sale

    Don't really know, that engine is used in other types also. I think my Helicycle is still the highest time one out there but also don't know that for sure. I was told that B.J. designed the components of the machine to go at least 2000 hours.
Top