Greg Vos's latest activity

  • Greg Vos
    Eclipse has been tested according to BCAR T......... Maybe but it has not been tested by the UK CAA who manage BCAR Section T. As such...
  • Greg Vos
    Greg Vos reacted to Vertical Tango's post in the thread Some xenon maintenance with Like Like.
    Hi Greg, in SA you will remember that Xenon owners were forced into a compulsory blade inspection at 2 occasions because a MT somewhere...
  • Greg Vos
    As far as I recall it was a faulty earthing connection in the switch itself and periodically on shut down one set of mags was alive , we...
  • Greg Vos
    Greg Vos reacted to Burrengyro's post in the thread Rotax carbs with Like Like.
    Rebuilt my Rotax 914 carbs last year. Only one fixing bolt underneath the bowl, as per Georgio744's photo. If you torque this retaining...
  • Greg Vos
    Greg Vos replied to the thread Rotax carbs.
    Thanks this is great! Sometimes that clip can be a pain appreciate the pic 👍
  • Greg Vos
    Greg Vos reacted to georgio744's post in the thread Rotax carbs with Like Like.
    One bolt
  • Greg Vos
    It was the plastic gear in the magneto it had stripped a few teeth ... on the 44 on one of my 22 expierinces it was the actual switch...
  • Greg Vos
    Greg Vos replied to the thread Rotax carbs.
    Still can’t see the 4 bolts that hold the float bowl?
  • Greg Vos
    Greg Vos reacted to Tyger's post in the thread Rotax carbs with Like Like.
    Some really good info on Bing 64s here: https://electricmotorglider.com/2017/02/01/bing-64-cv-carburetor-part-1/...
  • Greg Vos
    Greg Vos replied to the thread Rotax carbs.
    I have not seen one with bolts please can you post a pic .... all I have seen have the cam over clip ? In fact Google shows images with...
  • Greg Vos
    Greg Vos replied to the thread Rotax carbs.
    914 the float bowl is held in place with a clip underneath ? It’s sort of cams over and clicks in place ? Or have I got a lemon ?
  • Greg Vos
    Greg Vos posted the thread Some xenon maintenance in Xenon.
    Doing a 300 hour service on a xenon we decided to clean it up a bit, regarding the 25 hour blade inspection does anyone else remove it...
    • B534BF4F-E97F-43B6-B337-41102F701F12.jpeg
  • Greg Vos
    Greg Vos posted the thread Rotax carbs in General Discussion.
    Can anyone share some info on the bing carbs we find on the rotax 912/ 914 series A mate at our local airfield is of the opinion they...
  • Greg Vos
    Experienced this in a R44 myself
  • Greg Vos
    Greg Vos reacted to Martin W.'s post in the thread R44 Emergency Autorotation for Real. with Like Like.
    . Look closely and you will see the mag switch key is already in the OFF position when he does his panel shutdown . In other words he...
Top