Rotors Blades

[1946]

Made in China,Naca 8H12 6061-T6 lengths available between 3,500 to 4.000 x199mm , longer and different chord size, alloy, specification on request and minimum order, FOB China $1.200 a set. In the next month’s hopefully we will have available Patroney composite rotor blades at a very convenient price. By the way, all this products are of reversed engineering nature and made exactly to very stringent OM specifications.

Thanks
Albert

 

[bones]

Made in China,Naca 8H12 6061-T6 lengths available between 3,500 to 4.000 x199mm , longer and different chord size, alloy, specification on request and minimum order, FOB China $1.200 a set. In the next month’s hopefully we will have available Patroney composite rotor blades at a very convenient price. By the way, all this products are of reversed engineering nature and made exactly to very stringent OM specifications.

Thanks
Albert

Damn i bet Rob's frigging happy when he finds out your copying his blades and keeping his name on them.... is there nothing safe??

 

[bryancobb]

I don't understand. It looks like to me that there is no way these can have a chordwise center of mass around the 25% point, and I thought that was practically a requirement on all rotor blades?

 

[Sita]

You gyro guys try to keep your blades scratch free and threath them like a baby !!

The Chinese just stack them on top of each other on a tile floor , No Problemo !!!!

No padding-no special made racks-no nothing !!

Chop-choy rotor blade skin pattern for 1200 $ !!!!!


Cita

 

[Sita]

I don't understand. It looks like to me that there is no way these can have a chordwise center of mass around the 25% point, and I thought that was practically a requirement on all rotor blades?

There's room for a balance bar in the leading edge I think.

Cita

 

[WillyRose]

MTOsport blades from China?

MTOsport blades from China?

The above look like a stack of reverse-engineered old-style MTOsport blades (see below). All manufactured to AutoGyro GmbH's same high spec?

I'm not sure the CAA would look too kindly on us fitting blades sourced from other than the manufacturer...

All the best,
Clive

 

[StanFoster]

A brass rod is bonded into the nose to bring the CG close to 25% of chord. Stan

 

[Lee Scatt]

Ol Albert pulling this crap again.
Just like his re-drives, you'll never get the info needed to aquire a set of these blades.
I tried and tried to get information on his re-drive, willing to wait till whenever on the order. I was blown off. I imagine this will evolve the same way.
Ask him for an address.....ask for a name......ask for technical specs, you'll get pictures only.

 

[1946]

Ol Albert pulling this crap again.
Just like his re-drives, you'll never get the info needed to aquire a set of these blades.
I tried and tried to get information on his re-drive, willing to wait till whenever on the order. I was blown off. I imagine this will evolve the same way.
Ask him for an address.....ask for a name......ask for technical specs, you'll get pictures only.

Our Chinese PSRU were discussed in all possible details on RWF, spearheading by your and others negative and xenophobic attitude about the product and there innovations was the order of the day. If memories serve me right, you wanted to start a business selling BMW engines with our PSRU and we told you privately the amount your purchase is too small for us for a developing a BMW engine bell housing, in view off your attitude, you were blow off. Never the less, being a salesman, the devil is a good buyer too, and once seeing the color of his money business is possible and with this our contacts details.

China SubaruAir. LTD
China Subaru Automotive Sales. LTD
Tel: +86 0532 81100396
Mobile: + 86 18653261007 / + 86 13583250171 (Chinese speaking) 7 lines
Email: [email protected]
Email: [email protected]
New Material Industrial Park of Qingdao Hi-Tech
Development Zone Chengyang, Qingdao, 266111, China

Thanks
Albert

 

[1946]

The above look like a stack of reverse-engineered old-style MTOsport blades (see below). All manufactured to AutoGyro GmbH's same high spec?

I'm not sure the CAA would look too kindly on us fitting blades sourced from other than the manufacturer...

All the best,
Clive

All manufactured to AutoGyro GmbH's same high spec?

Jawohl, on the nano millimeter. We are not worried about the CAA or other authorities, it was re-engineered of our proposes and if there is any other purchasing interest, great, helps the gyro guys.

Thanks
Albert

 

[1946]

Damn i bet Rob's frigging happy when he finds out your copying his blades and keeping his name on them.... is there nothing safe??

At all times we are honest with our re-engineered products and never hide the original source of it. We believe is up to the buyer to make an informed decision.

Thanks
Albert

 

[Heron]

If they are to good specs, the gyro world will profit by having sub kits available for most projects.
Lets see how it goes in to market . . .
Now that I fell in disgrace with Mr. Holz, Brazil will need another contact for distributorship.
I hope they sell a lot, maybe I will get paid what is owed!
Hey, sent me two sets and we are square, topas?
Heron

 

[Lee Scatt]

We manufacture a box with integrated clutch (Aero 11) and at the moment designing bell housing for the BMW (oil heads) due to be completed by the end of this year.

Also are your gearboxs clones of the Autofight box?

No, we use a different DNA.

Regards
Albert

The above was a post by you.
I used this information you provided, to inquire on the availability. You are a lousy salesman, but, you take nice pictures.
I never had a negative thing to say, until dealing with you.

 

[Aviomania]

I was offered the same extrusion from Russia €900 a set..... but.....

still .. for our single seater nothing bits Ernie's!!!!

 

[choppergabor]

I just talked to some European gyro guys and they are having problems with blades folding in flight with exclusively the extruded blades. Scary $hit. I wonder what source those are from.......... Going cheapooo on a set of blade is like paying a crack hoe to DO you.....Do you know what you are getting? And catching? ROFL sorry the Devil made me do it

Buy American damn it!

 

[1946]

I just talked to some European gyro guys and they are having problems with blades folding in flight with exclusively the extruded blades. Scary $hit. I wonder what source those are from.......... Going cheapooo on a set of blade is like paying a crack hoe to DO you.....Do you know what you are getting? And catching? ROFL sorry the Devil made me do it

Buy American damn it!

That is interesting, indeed is very scary but, are you able to disclose those guys you are talking and rotor used, type, loadings..etc.. you know, with ‘having problems with blades folding in flight with exclusively the extruded blades?’ It would of great help knowing the shortcomings as presented. Do we know what are we getting? Of course we know, and are cheap because is not made in America , opps.. the devil made me say this.

Thanks
Albert

 

[Resasi]

Albert, you seem immune to what you see to be simple Xenophobia and everyone having a down on Chinese products.

They, and you, are quite happy to steal/copy what others have done research on and worked for years designing, or simply sit on the Forum and say hey guys what is wrong with this how could we do it better how do we do this, then go out and produce a stack of what look to be genuine products with no garantee of quality of workmanship or materials.

Patronys are made by an individual who put his own name and reputation on the product. You copy,call them Patronys and what happens when they fail to meet the specs??

You simply do not see how objectionable your behavior is!!

You seem to simply brush off this as if what we say is just a joke.

We are not joking and China has a terrible reputation for cheap shoddy copies that are substandard and break quickly. The trouble is they carry someone elses name and reputation.

You may well be employed to lurk on this forum to glean what information you guys do not want to take the trouble to find out for yourselves. If it was for an individual people would not mind so much however this is to mass produce and sell back.

If the product quality could be assured there would be a market because everyone likes a bargain, they are not quite so ready for a bargain for something that may well send them to their deaths.

I have no doubt you will take this as a personal xenophobic attack on China and your methods... and sadly you would be right.

 

[choppergabor]

:usa:

It would of great help knowing the shortcomings as presented.

Thanks
Albert

Yeah I will right now drop everything and figure it out for you Al! ROFL.........:der:
The reason is most likely that a bunch of thieves stole something they try to reproduce by its looks and not understanding the procedures and the mechanical forces nor the metallurgy of the part and they just "reverse engineer" things! That ain't engineering buddy. Its called copying. So there is most likely the problem right there. BUY AMERICAN!:usa:

 

[Brent Drake]

That is interesting, indeed is very scary but, are you able to disclose those guys you are talking and rotor used, type, loadings..etc.. you know, with ‘having problems with blades folding in flight with exclusively the extruded blades?’ It would of great help knowing the shortcomings as presented. Do we know what are we getting? Of course we know, and are cheap because is not made in America , opps.. the devil made me say this.

Thanks
Albert

What he is saying is, that you have no idea what metallurgy your blade is made of. What it's tensile Strength is, etc,etc. There was a lot of hours of design and research to find out what metal was the lightest, strongest and most flexible for the application that this blade needed for safety .For all we know, yours is made of a cheap aluminum that will fold and break the first time you put it under a high G stress.
Being cheap made doesn't have anything to do with it. Research and engineering does.
Your right we have much government that regulates us for safety. We do not kill people just to test things. Here human life has more value. And thousands of hours go into research and testing before its for sale to the public.

 

[brett s]

Why do people keep feeding that troll?

He's a cancer, copying ideas & designs from other companies in the name of "reverse engineering". Bull**** - it's intellectual property theft pure & simple.