Silencer for 503 $28 plus shipping -- SOLD

[rwr]

Bought for 503 Dominator years ago, but never got around to using it.

 

[Kevin 2424]

Will this fit the rotax 582 engine?

 

[Kevin 2424]

I will take it.

 

[Kevin 2424]

Does anyone have a way to contact this person? I would like to buy this from him

 

[JEFF TIPTON]

If you click on his username in this case "rwr" it will pull a box that will allow you to send him a message.

 

[Kevin_Richey]

By hovering your cursor over his Username, you'll see that he last visited the forum on April 28th. Best to contact the Georgia gyro group (I believe they have a FB page) for their help in contacting him.

 

[Brian Jackson]

Does anyone have a way to contact this person? I would like to buy this from him

If you're needing one now and don't care about price, I just purchased one new from Lockwood Aviation. Link below.

Lockwood Aero | Rotax Aircraft Engines

Lockwood Aviation Supply Rotax Service Center in Florida. Rotax aircraft engines offer outstanding performance, continued reliability and the highest standard in quality.

lockwood.aero

 

[Kevin 2424]

Thanks for the help. I tried the message thing before asking for help. I haven't gotten a response from him that way. I will see if I can use FB

 

[Kevin 2424]

I'm not good at FB. Can anyone point me in the right direction to find that facebook page.

 

[Kevin_Richey]

Here are two possibilities to contact RWR.

1. https://www.peachstaterotorcraft.org/ (their own website)

2. https://www.facebook.com/pg/TangoGyro/groups/ (granted, that FB page is centered on the Tango gyroplane company, but chances are high Paul knows how to contact Just Plane Bob.

 

[Kevin 2424]

Thanks for the help. I will try them.

 

[Kevin 2424]

Didn't have any luck with those. I guess I will have to wait and see if he ever comes back to see if it sold.

 

[Kevin_Richey]

Kevin2424: I found Robert's landline # in an internet search for his name in Newnan, Ga. I called him & had a pleasant conversation w/ him. I sent you his phone # in a PM here on the forum, which he gave his permission to do so. He has been meaning to get back here on the forum.

He still has the intake silencer for sale ($28 vs. Brian's referred Lockwood's price of about $275 is some savings to not spit @!). I told him a fellow in Magnolia, OH is wanting to buy it from him.

Nuwber.com revealed his landline #, whereas most of the search results come back as websites requiring paid access to personal information. telephonedirectories.us also produced his landline #, as well as his address in Newnan.

WHAT AN INTERESTING FELLOW! He is retired after a final career instructing for Delta in the 717 (MD-80). Was in a rock band in California long ago named Stained Glass (previously the Trolls), according to wikipedia.com. He told me his group had The Golliwogs (who became CCR) as their opening act once & that you can find youtube videos of some of their music! They recorded some of their music for the record labels & felt that if they held on long enough, they'd eventually become successful as other groups had.

He had a career flying fighter jets in the AF (became a Lt. Col) & had owned & flown a Dominator. Has a Dominator two-place project he'd like to sell (Hirth 4 cyl. 110 HP for it's engine). He modified the mains architecture & tires from the Dominator's design. He is planning on selling that project by placing an ad on barnstormers as well as other sites. Says that gyro is a rocket ship to fly.

He also knew Ernie Boyette & Carl Schneider in his gyro past. We even discussed Carl's propensity for going barefoot in any kind of weather, as well as Carl's efficient & quiet gyros he made.

 

[j4flyer]

Kevin there is a post for a guy wanting a dominator. Is there a way you can reach out in case he fails to read your new post ? Thanks for the information. We have a lot of interesting people in the gyro community.

 

[rwr]

Kevin2424: I found Robert's landline # in an internet search for his name in Newnan, Ga. I called him & had a pleasant conversation w/ him. I sent you his phone # in a PM here on the forum, which he gave his permission to do so. He has been meaning to get back here on the forum.

He still has the intake silencer for sale ($28 vs. Brian's referred Lockwood's price of about $275 is some savings to not spit @!). I told him a fellow in Magnolia, OH is wanting to buy it from him.

Nuwber.com revealed his landline #, whereas most of the search results come back as websites requiring paid access to personal information. telephonedirectories.us also produced his landline #, as well as his address in Newnan.

WHAT AN INTERESTING FELLOW! He is retired after a final career instructing for Delta in the 717 (MD-80). Was in a rock band in California long ago named Stained Glass (previously the Trolls), according to wikipedia.com. He told me his group had The Golliwogs (who became CCR) as their opening act once & that you can find youtube videos of some of their music! They recorded some of their music for the record labels & felt that if they held on long enough, they'd eventually become successful as other groups had.

He had a career flying fighter jets in the AF (became a Lt. Col) & had owned & flown a Dominator. Has a Dominator two-place project he'd like to sell (Hirth 4 cyl. 110 HP for it's engine). He modified the mains architecture & tires from the Dominator's design. He is planning on selling that project by placing an ad on barnstormers as well as other sites. Says that gyro is a rocket ship to fly.

He also knew Ernie Boyette & Carl Schneider in his gyro past. We even discussed Carl's propensity for going barefoot in any kind of weather, as well as Carl's efficient & quiet gyros he made.

Kevin, thanks for posting the info. One small correction,.. the gyro project I am selling is not a Dominator. It is a one-off design that might be closer to something Carl Schneider might put together,... although it does have the basic characteristics of the Dominator configuration. I'll have pics here in the "For Sale" section shortly.

 

[gyrodude]

I have a 503 intake silencer im not using. $30. Located central NC.

 

[Kevin 2424]

Do you have any parts with it or just the plastic housing? I'm interested in it

 

[Kevin 2424]

I got the first one. Now if I can just get gyrodude to reply or contact me I can try to get his.