Helicycle rotor blades

DASBUR

Member
Joined
May 11, 2005
Messages
202
Location
Burlington Wi
Pair of Helicycle rotor blades could be easily adapted to an experimental helicopter NACA23012 7.250 Chord 115 inches long

Doug
 
Hi

They are about 5 years old. They have less than 5 HRS on them. The previous owner just quite did not under stand the start procedure and melted the turbine wheel. He could not afford to repair the engine and started parting it out.
New from Helicycle the blades are $4800.00 I'll sell them for $2500.00
If you are still interested I can post a couple pictures.

Doug
 
Last edited:
Yep some nice detailed pics would help.
Plus a tape measure at the mounting holes at the root.
 
Hi the grip is 4.437 wide 3.200 high .500 hole back of the blade to center hole 1.125 drag link hole .312 thickness of grip 1.700
tips will need to be repainted there was packing tape on them of course when I pulled it of some of the paint also came off one blade.

Doug

They are about 5 years old. They have less than 5 HRS on them. The previous owner just quite did not under stand the start procedure and melted the turbine wheel. He could not afford to repair the engine and started parting it out.
New from Helicycle the blades are $4800.00 I'll sell them for $2500.00
If you are still interested I can post a couple pictures.

Doug
Pair of Helicycle rotor blades could be easily adapted to an experimental helicopter NACA23012 7.250 Chord 115 inches long

Doug
114504211450431145044
 
Last edited:
Top