Brian Jackson
Platinum Member
- Joined
- Jul 17, 2004
- Messages
- 3,527
- Location
- Hamburg, New Jersey USA
- Aircraft
- GyroBee Variant - Under Construction
No Title
Here is the Tie Channel concept (shown Green) mentioned above. Not shown in the screenshots are small compression spacer tubes the bolts will pass through that span the inside walls of the channel. This allows torquing the bolts without deflection of the parts.
Here is the Tie Channel concept (shown Green) mentioned above. Not shown in the screenshots are small compression spacer tubes the bolts will pass through that span the inside walls of the channel. This allows torquing the bolts without deflection of the parts.