Announcement

Collapse
No announcement yet.

PSRU Belt tracking - RAF Sparrow Hawk conversion

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • PSRU Belt tracking - RAF Sparrow Hawk conversion

    My PSRU belt is trying to slide off the pulley towards the outside. Only the end support bracket keeping on. How is this tracking adjustred?
    Belt is sliding towards the outside end. Only the end support bracket keeping it on. How to adjust tracking?
    CFI-ASMEL-IA, A&P
    @ 6450' MSL in W. Colo.

  • #2
    Look at the warp drive prop setup there should be a plate that is slightly larger than

    the top pulley that fits on first when the prop is installed the plate keeps the belt in line

    and there is no rubbing as it is spinning with the belt/pulley. you will notice there is a plate on the lower

    pulley to keep the belt from going forward the top plate prevents it from going aft.
    Best Regards,
    Eddie Sigman,Polvadera,nm
    (575) 835-4921

    Comment

    Working...
    X