Announcement

Collapse
No announcement yet.

A curious forum ERROR message!

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • A curious forum ERROR message!

    I had noticed this forum glitch previously ... but it seemed to sort itself out between visits! TODAY ... on my own thread ...I was blocked from viewing due to the last poster being G2K ... this message comes up ...." You are not authorized to view this page"! ... on EVERY & ANY post or thread by G2K!!!! I GET BLOCKED /LOCKED OUT of reading, viewing posting that thread! ... even when one I started!???? .... still got weird stuff going on in this new forum format!
    JEEZE ... what forum GODS did I piss-orf this time!?????????
    Chris T.
    3Rs - Rotors rock & rule!

    "Blessed are the flexible for they shall not be bent out of shape." Buck B.

    Time flies if you can but only the slowest.

    PRA# 4212
    EAA# 1126845
    AOPA#08888697

  • #2
    Can you take a screenshot and post it?
    Mike Gaspard
    Forum Administrator
    Kaplan, Louisiana
    Bensen B8MG, NX36MG

    Comment


    • #3
      I get the same message!
      Jay Gunderson

      "Wise men talk because they have something to say;
      fools talk because they have to say something."

      Plato

      Comment


      • #4
        Pic of screen on my laptop Only shows when I try to view something posted by G2K ... some one else post on my thread & see if we can bypass that block ????
        Chris T.
        3Rs - Rotors rock & rule!

        "Blessed are the flexible for they shall not be bent out of shape." Buck B.

        Time flies if you can but only the slowest.

        PRA# 4212
        EAA# 1126845
        AOPA#08888697

        Comment


        • #5
          Yeah, I got that also on Saturday. I just logged out and logged back in and everything was a normal/
          David McCutchen
          615-390-2228
          Bensen B7m, 90 hp Mac
          Dominator Tandem, 100 hp Hirth
          Kolb Mark III Classic, 80 hp Verner
          Certified - Advanced Master Beef Producer
          EAA Member #0511805
          PRA Member #28866
          PRA Chapter 16 Member
          Secretary & Treasure - PRA Chapter 16
          President / Sylvia - Yellow Creek Volunteer Fire Dept.
          Chairmen - Dickson County Veteran's Day Committee
          Volunteer - Dickson County Airport Aviation Day Committee
          2 busy 2 No!

          Comment


          • #6
            I don't see any picture Chris.
            Email it to me at gyromike at y a h o o . c o m
            Mike Gaspard
            Forum Administrator
            Kaplan, Louisiana
            Bensen B8MG, NX36MG

            Comment


            • #7
              I've had no issues even with multiple computers.

              GK2 mainly posts links to Youtube videos, maybe the error is related to that.

              Comment


              • #8
                "Bensen days 2018


                Sorry, you are not authorized to view this page"

                Quotes added by me. Mike: This is what I have been getting for some time. I didn't get the possibility of it being related to any postings by G2K, like "Detective" Christine surmised!

                When I log off, and then back on, I get this same message. Logging off and then viewing the forum w/out logging back in enables me to view the thread.

                Comment


                • #9
                  Logged offf ...was able to view the pages ... in the thread ...logged in again ...error message ... "Sorry, you are not authorized to view this page" ... came right back! ...... In the past whenever G2K posted a video & I tried to view it ....it blocked me in this manner .... as far as I can telll only G2K posts makes it behave this way for me! ?????? BUFFALOED!
                  Chris T.
                  3Rs - Rotors rock & rule!

                  "Blessed are the flexible for they shall not be bent out of shape." Buck B.

                  Time flies if you can but only the slowest.

                  PRA# 4212
                  EAA# 1126845
                  AOPA#08888697

                  Comment


                  • #10
                    OH WELLL HELL ...anyone interested in BDays reports & pics ... go look up a FB gyro site!
                    Chris T.
                    3Rs - Rotors rock & rule!

                    "Blessed are the flexible for they shall not be bent out of shape." Buck B.

                    Time flies if you can but only the slowest.

                    PRA# 4212
                    EAA# 1126845
                    AOPA#08888697

                    Comment


                    • #11
                      I can't find anything that would cause that issue, but I can't get very deep into the vBulletin software.
                      I'll keep looking.
                      Mike Gaspard
                      Forum Administrator
                      Kaplan, Louisiana
                      Bensen B8MG, NX36MG

                      Comment


                      • #12
                        Check if this list of GK2 videos will play for you.
                        They are the Bensen Days 2018 videos. Maybe relisting them will make them play for you.


                        https://www.rotaryforum.com/search?s...cted%22%3A1%7D
                        Last edited by Mac; 04-14-2018, 09:11 PM.

                        Comment

                        Working...
                        X