Announcement

Collapse
No announcement yet.

Settings for MGL ROTOR-1

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Settings for MGL ROTOR-1

    Does anyone happen to know the settings in order to set up the Rotor Tac for the MGL Rotor-1? I have Aircommand with 108 teeth, got the sensor hooked up and just trying to figure out the settings. 100% value is currently set at 1000
    Pulse/Rev is at 1.0
    Filter is set to Span
    Pulse is set for pulse

    Thanks in advance!

  • #2
    Go to menu and set calibrate to 108
    Life,The leading cause of Death

    Live and Learn--OR--Die and be an example

    321.252.7705

    Comment


    • #3
      If your sensor counts actual Gear Teeth...

      100% value: 350 (Or whatever your Rotor Cruising rpm is)
      Pulse/Rev: 108 (Number of Gear Teeth per rev)
      Filter: Scale
      Pulse: Pulse


      If your sensor counts Magnets...

      100% value: 350 (Or whatever your Rotor Cruising rpm is)
      Pulse/Rev: 1.0 (Or the number of Magnets per rev)
      Filter: Scale
      Pulse: Time


      This is all explained in the Owner's Manual.

      http://www.mglavionics.co.za/Infinit...als/Rotor1.pdf


      Comment


      • #4
        Thanks, I actually called MGL up and they helped me out. Now the 100% value I just left what ever was in there. I am not sure what the rotor crusing RPM is. But everything else is the same for Filter and Pulse.

        Comment

        Working...
        X