Rotary Wing Forum  

Go Back   Rotary Wing Forum > Kit Makers & Manufacturers > Single Place Designs

Reply
 
Thread Tools Rate Thread Display Modes
  #1  
Old 02-12-2005, 04:37 PM
scottessex's Avatar
scottessex scottessex is offline
Sling-Wing Pilot
 
Join Date: Nov 2003
Location: central, ga
Posts: 9,930
Thumbs up Wooohoooo! Soloed the soma!

WHOO HOOO! Well I just got back from Macon, went down late this afternoon to fly the Soma, I was just going to do some crow hopping and get used to it, Well I ended up flying it around for better than 30 min, I was getting cold. But I was having Too Much Fun! It was a little windy, but it was blowing right down the runway, and steady, Fly's great! Those Dragon wing blades are awsome, incredibly smooth, the thing climbs like a monkey, I was able to bring the rpm's back to about 5000 and still maintain good level flight at 60 mph.

I went down with a friend from work, and I picked up Phil Ruffin on the way, Dan Leslie met us out there, and he flew for a little while too.
I was worried I would have forgotten alot, but I could still hear Steve's voice, "power, pedal, balance, don't look at the ground, power, balance"
SWEEET!
Man I am so happy!
__________________
The government cannot give anything to anybody that the Government does not first take from somebody else.

“I prefer dangerous freedom over peaceful slavery.”
- Thomas Jefferson


Scott Essex....Flying H Ranch
Reply With Quote
  #2  
Old 02-12-2005, 05:08 PM
MattPearson's Avatar
MattPearson MattPearson is offline
Gold Supporter
 
Join Date: Oct 2003
Location: Shady Shores, TX
Posts: 431
Default

Congrats Scott. Glad you were able to "get back on the horse" so soon!
__________________
Reply With Quote
  #3  
Old 02-12-2005, 05:11 PM
skyguynca skyguynca is offline
Gold Member
 
Join Date: Sep 2004
Location: Acampo, CA
Posts: 945
Default

Congrats Scott!!!!!!!! Sounds like a great gyro!!!!!!
Reply With Quote
  #4  
Old 02-12-2005, 05:21 PM
GyroRon's Avatar
GyroRon GyroRon is offline
Shut up and fly
 
Join Date: Oct 2003
Location: Fort Mill South Carolina
Posts: 15,527
Default

Alright!!!

How was the pump stick for ya? How did you like the stability? Seemed to need a good bit of rudder at slower speeds but was pretty solid otherwise, but it has been a while since I flew it.
__________________
...Ask me and I will tell you..if you don't want to know then don't ask.
Reply With Quote
  #5  
Old 02-12-2005, 05:38 PM
scottessex's Avatar
scottessex scottessex is offline
Sling-Wing Pilot
 
Join Date: Nov 2003
Location: central, ga
Posts: 9,930
Default

The pump stick was a non-issue, flew very sweet, nice and stable, no nose-up pitching like the old kb-3, just all around NICE, might fit it for a trim tab, But no complaints, The engine purred, all temps were right in range, no stick shake, and nice soft landings. everything went very smooth. I am a happy camper now, Now to get Phil back up in the air......Then John Stevens.
__________________
The government cannot give anything to anybody that the Government does not first take from somebody else.

“I prefer dangerous freedom over peaceful slavery.”
- Thomas Jefferson


Scott Essex....Flying H Ranch
Reply With Quote
  #6  
Old 02-12-2005, 06:22 PM
Greg Mitchell's Avatar
Greg Mitchell Greg Mitchell is offline
Senior Member
 
Join Date: Mar 2004
Location: Australia
Posts: 1,942
Default

Good Onya Scott. Glad you're back up there.
Mitch
__________________
"What has become apparent, is that we still huddle together in groups that confirm our existing beliefs."
Virtual Revolution. 2010

Australia and New Zealand Licensed Importer/Manufacturer of Larry Neal's Butterfly Gyroplanes

www.thebutterflyllc.com
Reply With Quote
  #7  
Old 02-12-2005, 06:34 PM
Jerseywing's Avatar
Jerseywing Jerseywing is offline
Senior Member
 
Join Date: Sep 2004
Location: North Arlington NJ
Posts: 335
Send a message via AIM to Jerseywing
Default

Fantastic Scott
Well deserved...
Enjoy!!!
__________________
Michael Avenoso
PRA, EAA, AOPA
So much to learn, so little time
Reply With Quote
  #8  
Old 02-12-2005, 07:03 PM
CLS447's Avatar
CLS447 CLS447 is offline
Platinum Member
 
Join Date: Oct 2003
Location: Reading, PA
Posts: 5,269
Default

Man ... I am happy for you! You got a rare bird there, try to keep this one in one piece. Just kidding!
__________________
Happy Flying, Chris S.
Reply With Quote
  #9  
Old 02-12-2005, 07:08 PM
ToddP's Avatar
ToddP ToddP is offline
Administrator
 
Join Date: Oct 2003
Location: Spokane, WA
Posts: 1,278
Send a message via Skype™ to ToddP
Default

Great News Scott. It sounds like you've found a great machine there. I'm sure you've got a fantastic summer ahead of you!
__________________
Todd Powell - Spokane, WA
Dominator Gyro 634TP
Reply With Quote
  #10  
Old 02-12-2005, 07:08 PM
Screw's Avatar
Screw Screw is offline
Lubricating & Stimulating
 
Join Date: Oct 2003
Location: Loganville, Ga.
Posts: 2,735
Default

Screw-Out

Chris aint kiddin

I am so glad everything went so well. Scott was as giddy as I've ever heard him over the phone. For the first time, I wasn't able to get a word in edgewise. I can't think of anyone who diserves a break more.

Good on you Scott. I am so excited for you.

Screw-Out
__________________
John Stevens
Builder and Former Owner
Brock KB-2 N36KB
Dominator N618SD
PRA# 39322
Chapters 13 & 26
jpstevens2003@yahoo.com
Reply With Quote
  #11  
Old 02-12-2005, 08:16 PM
GyroRon's Avatar
GyroRon GyroRon is offline
Shut up and fly
 
Join Date: Oct 2003
Location: Fort Mill South Carolina
Posts: 15,527
Default

Scott, next project is to fill in the holes on the runway and make it smoother.
__________________
...Ask me and I will tell you..if you don't want to know then don't ask.
Reply With Quote
  #12  
Old 02-12-2005, 08:27 PM
Brent_Brown's Avatar
Brent_Brown Brent_Brown is offline
Platinum Member
 
Join Date: Oct 2003
Location: Linden, NC
Posts: 3,275
Default

Happy Happy Joy Joy.
__________________
Brent Brown
brentbrown@caci.com
ezgb@earthlink.net
Reply With Quote
  #13  
Old 02-12-2005, 08:27 PM
Timchick's Avatar
Timchick Timchick is online now
Tim Chick
 
Join Date: Sep 2004
Location: Panama City, Florida
Posts: 10,013
Default

Scott,
Congrats on getting back in the air!
__________________
Tim Chick
Watch videos of Bensen Days 2007 - http://www.youtube.com/view_play_lis...B8C1F17B074D3F
Watch videos of Bensen Days 2008 - http://www.youtube.com/view_play_lis...DCDDF78B4169D3
Watch Gyro TV -------------------- http://bellsouthpwp.net/t/c/tchick/gyrotv.html
My Sport Copter Build -------------- http://www.rotaryforum.com/forum/showthread.php?t=25142
Reply With Quote
  #14  
Old 02-13-2005, 05:57 AM
scottessex's Avatar
scottessex scottessex is offline
Sling-Wing Pilot
 
Join Date: Nov 2003
Location: central, ga
Posts: 9,930
Default

Ron you are right about the runway maintenance, The only problem is that I have been trying to get ahold of the property owner about repairs. I don't mind doing them, but I don't think I should have to be the one to pay, if it is comunity property out here, But I will see what I can do, and save receipts, if nesesary.
I did take the tractor out the other day and ran over all the ant hills I could find.

Looks like rain today, But I will put the blades back on the soma, so it will be ready when the weather is nice this week.
__________________
The government cannot give anything to anybody that the Government does not first take from somebody else.

“I prefer dangerous freedom over peaceful slavery.”
- Thomas Jefferson


Scott Essex....Flying H Ranch
Reply With Quote
  #15  
Old 02-13-2005, 06:35 PM
Timchick's Avatar
Timchick Timchick is online now
Tim Chick
 
Join Date: Sep 2004
Location: Panama City, Florida
Posts: 10,013
Default

Scott or Ron, What's a pump stick?
__________________
Tim Chick
Watch videos of Bensen Days 2007 - http://www.youtube.com/view_play_lis...B8C1F17B074D3F
Watch videos of Bensen Days 2008 - http://www.youtube.com/view_play_lis...DCDDF78B4169D3
Watch Gyro TV -------------------- http://bellsouthpwp.net/t/c/tchick/gyrotv.html
My Sport Copter Build -------------- http://www.rotaryforum.com/forum/showthread.php?t=25142
Reply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -8. The time now is 06:53 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.
Ad Management plugin by RedTyger