Need some parts
I am presently rebuilding a damaged Enstrom 280C.
I need one engine mount bushing, I have 7 out of 8. I also need one engine bolt and castle nut and one spacer that goes between the two bushing rubbers. I have 3 out of 4 of the special thick washers that are part of the engine mount assembly. I need one of them also.
My engine mount is a Lord 3" J-10386-2 system with the bushings J-7763-26. I don't have the spacer number at my finger tips but if you have the bushing you probably have the right spacer.
These bushings and parts are for a Dynafocal mount for an IO-360
toolmanx
|
05-09-2012, 11:26 AM
:IF AT FIRST YOU DONT SUCCEED WITH YOUR DREAMS,DREAM ON,DREAM ON TIL YOU SUCCEED 
Linear Mode
