Front Gear Bulletin Xenon

PTKay

Gold Member
Joined
Jan 7, 2004
Messages
3,160
Location
Poland
Aircraft
Socata Rallye
Last edited:
Bad Links

Bad Links

Paul,

Those links gave me 404 errors and a forbidden entry.

Rob
 
Never mind- got to the annexes in english from the main German site.
Rob
 
Google translation

GyroFly & vertriebs GmbH
Airfield Niershorst
47929 Grefrath
29.08.2012
Name - Type / model:
! Xenon 2 R / RT / RST
Serial numbers:
! All
Subject
! Inspection of the nose wheel holder / Front Landing Gear Unit
Deadlines:
! Inspection of the affected parts before the next start by a Qualified
! Person / holder for instructions in Annex 01
Occasion:
! The GyroFly & vertriebs GmbH was informed that a Xenon2
! for loading onto a trailer the nose wheel holder is broken. When
! Investigation, provided a fracture due to corrosion of the tube with the
! welded sheets out.
Mass data:
! no effect
Procedural Notes:
! Inspection:
! Inspection of the affected parts before the next start by a Qualified
! Person / holder for instructions in Annex 01
! Part no. re: XE.000.FLG.200.00.01
! Periodic inspections and actions:
! The nose wheel holder (Front Landing Gear Unit) must be tested according to Annex 01
! are:
! ! After each transport means transport platform (trailer, truck, etc)
! ! After every hard landing or emergency landing
! ! After each takeoff / landing on rough terrain or runway
Technical Note! TM X2-021-ENG
Page 1 of 2 of the technical communication
! These checks should damage or cracks are found, have
! The affected parts should be replaced with a new one.
! By Celier Aviation SP. Z o.o. is hereby of a TBC (to be changed)
! Nose wheel holder (Front Landing Gear Unit) set at 500 hours.
! When it is necessary, the means of a transport platform xenon
! transport is recommended, as the Xenon on the respective transport platform
! secure described in Annex 02.
!
! Celier Aviation SP. Z o.o. recommended regardless of a possible damage to all
! Holders that the nose wheel holder No! XE.000.FLG.200.05.01 new parts to
! . replace
! All products manufactured since January 2012 Xenon come standard with the new
! Nose-wheel holder equipped.
!
Documentation:
! All inspections carried out must be recorded in the device logbook.
! Should any damage or cracks are found, appropriate
! Information immediately to the GyroFly & vertriebs GmbH as well as the
! Manufacturer Celier Aviation SP. Z o.o. to send.
! If the replacement of the nose wheel holder (Front Landing Gear Unit) required
! be, are the only parts of the GyroFly & vertriebs GmbH
! relate.
! The GyroFly & vertriebs GmbH as well as the manufacturer Celier Aviation Z OO
! provide assistance in the implementation of inspections and the part-
! Exchange regarding this technical communication. Any costs
! Costs due to this technical note, with the respective holder.
Annex 01: Procedure of inspection of Front Landing Gear Unit
Annex 02: Recommended transport method for xenon gyroplane
Technical Note! TM X2-021-ENG
Page 2 of 2 of the technical communication
 
Top