|
|
|
|
#1
03-10-2006, 04:53 AM
|
||||
|
||||
New member with Plans built dominator
After lurking and bottom trolling I finally thought I would join this forum. Thanks for all the info, laughs, B/S, pictures. I have been flying gyros for about 15 years, Jim Digaetano taught me in Las vegas to fly gyros and I will forever thank him for introducing me to safe gyro flying, God rest his soul. We went to Taiwan together to fly gyros and to try and start a gyro company over there, man the chinese are tough people to do business with.
Anyway I am now building a plans built Dominator, so if anyone has any questions or helpful hints, they will be appreciated. Will try to post pictures too. Carey 
|
|
#2
03-10-2006, 09:23 AM
|
|||
|
|||
|
Welcome Carey, I am also building my Dominator from plans. I have been flying my stock Bensen for the last 12 year and hope to retire it soon and replace it with the Dominator.
Frank
|
|
#3
03-11-2006, 05:45 AM
|
||||
|
||||
|
Frank how far along are you with your dominator? What are you using for an engine? What state are you in? I have posted some pics in the builders corner. I look forward to talking with you.
__________________
Carey Light Raptor Aviation Wings that swing, are my choice!!!
|
|
#4
03-10-2006, 09:30 AM
|
|||
|
|||
|
Welcome both of you to the Dominator family.
__________________
"You can try to educate the ignorant but, you can't argue with stupid" Mike Boyette Recreational Pilot Gyroplane Sunstate Wing & Rotor Board Member Pra Member #46553
|
|
#6
03-10-2006, 09:38 AM
|
||||
|
||||
|
Hello Carey.
Welcome to the worlds best Rotary wing forum. This is the place you get all you need and some more. Glad to know that you made a good choice of gyro. Dominator is the best plan built gyro flying today. I push a similar gyro with 914 turbo, for high altitude flying. Good Luck and Best Regards. Rehan K.Janjua Air Command. Pakistan
|
|
#8
03-12-2006, 09:57 AM
|
|||
|
|||
|
Carey, I have all my welding done and finishing the machining, I even machined the rotor head that in the plans. I should be starting the tube frame within the next month. I have a 503 that will be comming off my Bensen. I am from Florida but I am working in upstate ny right now. Nice looking pictures you have posted.
Frank
|
 |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Hybrid Mode
