|
|
|
|
#1
03-30-2004, 01:05 PM
|
||||
|
||||
Bing 64 Carbs
Bing 64 Constant Speed Depression Carburetors (two carbs). Bing 64/32/404 left and 64/32/405 right. Like the ones used on the Rotax 912/914, HKS700E, Subaru, and other 4-stroke engines. They are in good shape. Less than 100 hours use.
New they costs around $440 each = $880 for both. I’ll take $350 for both of them. If you want the tube steel manifold that they were mounted to (see photo) I can let you have it, as I believe it could be used easily to adapt to a Subaru or other engine. They work so that they go to full speed if the cable breaks, but can be modified to go to the idle position if desired. Ken
__________________
Ken Rehler - New Braunfels, Texas - Ken's Gyro Last edited by rehler; 05-13-2004 at 08:31 AM. 
|
|
#2
04-17-2004, 03:21 PM
|
||||
|
||||
|
These are great carbs. I believe they would be good on a Subaru engine if anyone is building a gyro with a Subaru engine.
__________________
Ken Rehler - New Braunfels, Texas - Ken's Gyro
|
|
#3
05-11-2004, 06:33 AM
|
||||
|
||||
|
The Bing 64 carbs are ready for a new home. Let me know if you need them.
__________________
Ken Rehler - New Braunfels, Texas - Ken's Gyro
|
|
#4
05-11-2004, 06:35 AM
|
||||
|
||||
|
Ken put A FREE ad for them on www.barnstormers.com
__________________
...Ask me and I will tell you..if you don't want to know then don't ask.
|
|
#5
06-14-2004, 09:20 AM
|
||||
|
||||
|
The Bing 64 carbs are ready for a new home. Let me know if you need them.
__________________
Ken Rehler - New Braunfels, Texas - Ken's Gyro
|
|
#6
09-05-2004, 02:48 PM
|
||||
|
||||
|
The Bing 64 carbs are still for sale - see post #1 above.
__________________
Ken Rehler - New Braunfels, Texas - Ken's Gyro
|
|
#7
09-23-2004, 11:30 PM
|
|||
|
|||
|
Screw Atkins. I'll take the carbs.
Greetings.
I am building up a surplus Rotax 914 from a low hour Predator. (The Predator wasn't mine!) If you are 100% sure the carbs will work on my 914, I'll take them without a haggle. If the tube steel manifold will be of use to me, I'll gladly take them too. Call me at 954-510-1515 with your mailing info etc. Regards, David Wolfe
|
|
#8
09-24-2004, 12:17 PM
|
||||
|
||||
|
Gee Ken , you sure drive a hard bargin!!!, good luck on your transfer of rotorblades as well. There is no telling what you will improve on your show stopper gyro next with all these sales going on. haha
__________________
Mark Carmouche KB2,KB 4 N582BC
|
|
#9
09-26-2004, 02:03 PM
|
||||
|
||||
|
Mark,
The rotor blades are on the way to their new home. Bill picked them up this morning. Nice guy! We had a good visit.
__________________
Ken Rehler - New Braunfels, Texas - Ken's Gyro
|
|
#10
09-27-2004, 01:44 PM
|
||||
|
||||
|
David,
Sorry I missed you by phone. Hope you got my e-mail. Ken
__________________
Ken Rehler - New Braunfels, Texas - Ken's Gyro
|
 |
| Thread Tools | |
| Display Modes | Rate This Thread |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Outboard Engine Help | gyroman | Off Topic | 41 | 09-26-2004 04:01 PM |
| dual carbs on 503? | Alan Coats | Engines | 16 | 09-12-2004 07:43 PM |
| Bing 45 on a Mac | joeheli | Engines | 21 | 09-10-2004 10:41 PM |
| bing jets, and rotax A box | scottessex | Wanted | 1 | 03-04-2004 04:47 AM |
| 503 dual carb manifolds and Bing 54 carb | MikeLindsay | Wanted | 0 | 12-14-2003 01:54 PM |
Hybrid Mode
