Chris, let me give you the absolute best piece of advise you can get on this forum.
Find someone knowledgeable with gyroplanes, and make buddies with him or her. Get that persons phone number and start calling and asking questions.
Blade set up is very simple. All you should need to do is install the 12 bolts and your done, all the set up is done at the factory. But there is a side A and a side B, on the blades and hubbar, so you need to put the right sides together, and there is a trick or almost art form to getting the bolts in and out of the blades my hand..... do it by turning the bolt in and out or with a hammer and you will ruin the blades.
If you want me to test fly this thing, they maybe you should call me from time to time, I will gladly help you out over the phone. Otherwise there are countless good folks on this forum that can help.