redrives for powered rotorheads

[Brent_Brown]

I found a web site that has some small redrives for small motors. this one is a 5.33 to 1 run this to a bendex type pre ro and that will slow it down to about 20 to 1. here is the site lots to look at here. www.staton-inc.com

[Brent_Brown]

This is a 50 to 1 I think that will have 320 RPM at 6.5 foot pounds at the out put or something like that look on the web site above.

[Brent_Brown]

this is a motor to work with maybe? anyone think it will work. I would like to hear how you would use any of this or how to make it better suited for spinning rotor blades.

[quadrirotor]

may be there is something there too:

http://www.noram-clutch.com/

http://www.hoffcocomet.com/comet/differentialindex.htm