View Full Version : Torque on bolts for Bensen Blades
02-08-2005, 01:24 PM
Can someone tell me what the recomended turque should be on the Bensen rotor blade mounting bolts?
02-08-2005, 01:49 PM
About 25 ft.-lb. The more important thing is to get them as nearly equal as possible, particularly the tension (horizontal) bolts.
The instructions also specify that the thicker of the two types of steel bridge plates should go under the heads of the horizontal bolts, and the thinner ones under the nuts (whixh are also to have conventional washers). These steel plates bridge the oversize holes in the blocks that allow pitch adjustment. Makes sense.
vBulletin® v3.8.4, Copyright ©2000-2013, Jelsoft Enterprises Ltd.