Brock joystick mounting location

[five o flyer]

Hi everyone,
I have a Brock joystick and would like to know where specifically on the keel
the stick should be mounted. In other words, from the front of the keel what are the dimensions in inches where the two mounting blocks are located?
Can any of you please help me. I have an old set of bensen plans which is fine for most of the machine, but needless to say, these don't address the
brock stick location. Thanks for the help.

five o flyer

[dabkb2]

Five o Flyer

The measurements are 22.938"-42.125".

I have the plans on my computer, if you give me your email I will send them to you. They are to big to upload here.

[Bumperdog]

Hi everyone,
I have a Brock joystick and would like to know where specifically on the keel
the stick should be mounted. In other words, from the front of the keel what are the dimensions in inches where the two mounting blocks are located?
Can any of you please help me. I have an old set of bensen plans which is fine for most of the machine, but needless to say, these don't address the
brock stick location. Thanks for the help.

five o flyer

Five 0
I just now measured my KB3 for you and it is from the front of the keel 23" to the center of the first block and 42" to the center of the second block.
Bruce

[five o flyer]

Thanks ever so much guys. This forum is great! Dave... I'll send you a PM in reference to those plans.

Tim (five o flyer)