PDA

View Full Version : progress


hawhi
02-15-2010, 02:02 AM
frist a BIG "thank you" to all the gang
in this site !!!
slowly my gyro start to look like something that fly.:confused:
this is a pic" of the tail, 2 layer of carbon 1 layer fiberglass
verey light & strong the seat is homemade too .
my prop is clockwise (ivoprop) looking from behind
are the tail need to assemble diagonal to left or right ?
thak you!

Dirtydog
02-15-2010, 02:27 AM
hawhi :
Lots of fun messing with glassing......Is that the tail that Thomas put plans up?

If so it is a great tail for stability.....:party:

Looks Great!

Redbaron
02-15-2010, 02:33 AM
How much area is your horizontal stabilizer? Looks good! Dog I'm about too the point of hooking up my fuel system, should I post pictures or are your eyes burning from looking? :noidea: :lol:

hawhi
02-15-2010, 09:21 AM
yes it thomas tail
the HS is 9 sq.

Dirtydog
02-15-2010, 04:50 PM
hawhi :
Mine work great! Also Thomas's

hawhi
02-23-2010, 09:33 AM
are the offset is to left or right???

Dirtydog
02-23-2010, 04:20 PM
hawhi :
I think it matter which way you motor is turning......P factor.....

I know mine I have to put a lot of Left pedal in to it going down the runway.....

When I went flying in Macon with Steve his Parson's takes Right pedal.....

RockyMeLad
02-24-2010, 10:31 AM
hawhi,

Assuming your "clockwise" is standing behind the gyro looking forward, the front of your vertical stab should be to the right, and the rear to the left on a short tail that is below the center of the prop.

My angle is set so there is a little left rudder needed at full power on take-off, and about the same right rudder landing without power. Seems to be a very good compromise under all conditions.

Dirtydog
02-24-2010, 04:20 PM
RockyMeLad :
You have any pictures of your tail? ok be nice..........:lol:

RockyMeLad
02-24-2010, 08:41 PM
No. . . none of my tail :rolleyes:, but I found a picture of the DesertBee in the hangar at Mentone from last year.
Here is an extract from it that is about as good as I have right now. If I remember next time I go to the airport, I'll try to get a better one.
The front and rear mounting brackets are identical, but turned 180*.

Dirtydog
02-25-2010, 02:20 AM
RockyMeLad :

I see you have your tail off set also. I might end up having to do the same thing or put on some type of trim tab to help out. It takes a lot of Left pedal to keep it going down the runway straight. If there is a crosswind coming from the right well forget it. I found out that the other day.......:blabla:

Would be great to get a better look see at the bee tail...!