prerotator drive drum/wheel/parts

[scottessex]

looking for a large prerotator drive drum, for a rotax bolt pattern.

OR I may use a plate like the dominator uses, but then I will need the bendix and gear at the rotorhead, to change the dirrection.

So I am looking for either/or. let me know if you have prerotator parts, I may be able to use some of them. I am not looking for a complete assy.

[rehler]

I think I still have the 10" diameter aluminum drum with the rotax bolt pattern ... or did I sell it? I'll check when I get home.

I also have the 45" long Wunderlich flex cable for sale ($220 new - I'm asking $85).

[scottessex]

Let me know, I'll do some measuring.

[rehler]

Yes, I do have the 10" drum. It has both the standard Rotax bolt pattern and the larger Rotax 912 bolt pattern. However, the center hole is 40 mm (close to 1.5" diameter), not the standard 1" hole used by the smaller Rotax engines. It would need a filler "washer" (40 mm diameter with 1" center hole about 3/16" thick) if you need the 1" center hole. I could make such a filler for you if needed.

I think about $45 + $8 shipping would be a fair price. See photo.

[Friendly]

Scott, if Ken is selling it will be in good shape. He is fussy about his gyro. I have a friend who recently bought some blades at a very good price and condition for Ken. And Ken have you flown your new blades yet, how about a report.

[Friendly]

ooophs.... not for ken From Ken.

[scottessex]

Ken that would be great, I redrilled my old arrow drum,but it is still small, it also could use a center washer, I should be able to make a filler washer on my small lathe. I am however going to go to your website and take some good looks at your mounting arrangement! :)

Ken are you going to ROC? If so just bring it with you, and I'll give you the $8 for shipping! :)

[scottessex]

Ken bring your pre rotator drive cable too, I may just take both of them off your hands at that time. That way you will have some grocery money for the trip home.

[rehler]

Scott,

Sorry, as you know, I left to ROC before I read your post. I can ship it to you and the cable too if you want it. Send me an e-mail at home rehler@satx.rr.com and let me know your mailing adress.