prop selection

[jany77]

hi guys i have this question about selecting the right prop for rotax 447 ,i know the prices from warp drive ,ivo prop,powerfin are pretty close so here it is 2 blade vs 3 blade im pretty sure im going with 62" if two blade ,im more or less woried about the adjustment of pitch i personaly like ivo due easy adjust pitch but then heard that powerfin is better so id like to here some pron and cos between these three POWERFIN , WARP DRIVE , IVOPROP thank you

[GyroRon]

Get a 2 blade Warp drive..... best, most durable prop on the market.

[jany77]

how hard is it set the pitch on it

[Friendly]

Warp drive has a protractor that clamps on the blades . You first put it against the face of the prop hub and make sure it is at 0 degrees vertical. Then loose each blade enough to twist the blade in its holder and twist to desired degrees. Not hard , just time consuming. you can also use a digital degree meter from harbor freight and read the degrees from it. I have check my protractor against the digital meter and found them to be the same.

[jany77]

thank you guys