PDA

View Full Version : Wanted Please help Brake pads/caliper

barnstorm2
07-09-2004, 04:18 PM
I need new pads for this caliper or a new caliper with pads.

If you have one you are willing to sell or know of a souce for pads please let me know.

Thanks!
barnstorm2
07-09-2004, 04:23 PM
Picture of it mounted.
KenSandyEggo
07-09-2004, 05:06 PM
Tim, I can't make it out real well, but I just refaced my prerotator clutch plate with some brake material and J-B Weld. Could you maybe do the same?
barnstorm2
07-09-2004, 08:47 PM
perhaps, where did you get the brake material and how did you shape it?
KenSandyEggo
07-09-2004, 08:53 PM
I got it from a local shop that refaces clutches and brakes, mostly for large equipment. I bought a square foot from them. The clutch was round, so I used a hole saw. You can also shape it with a Dremel tool with cutting wheel.
barnstorm2
07-10-2004, 06:15 AM
Cool. If I don't get any respones by next week I will try that. Thanks!

BTW which flavor of JB did you use?
KenSandyEggo
07-10-2004, 08:53 AM
JB only comes in one flavor here, the black and white tubes, which makes a gray compound..
Harry_S.
07-10-2004, 09:50 AM
Tim:

I replaced the clutch material on my PR and used Permatex QM-50A. It's a 2 part Epoxy adhesive. One plunger spits out both parts for mixing.

You can get it at any Auto Parts store, as well as Pep Boys Aviation Supply. I used it 3 years ago on The PR and it's still a go. Should bond anything to anything. :confused: